.svg){kind=small}
Key Features |
|
|---|---|
Standards |
SystemOne™ Meets or exceeds ANSI A118.10 Meets or exceeds ANSI A118.12 IAPMO |
TECHNICAL DATA ARDEX S 1-K™ |
Installation Mixing Ratio: Single-component mix. Do not dilute or mix with additives. Approx. Coverage: 195.5 sq. ft. (18 sq. m) per 3.5 gal. (13 L) unit, 2 coats over drywall 56.75 sq. ft. (5.27 sq. m) per 1 gal. (3.78 L) unit, 2 coats over drywall * Coverage will vary with substrate surface profile, porosity and texture. Performance Working Time: Unlimited. Seal unused portion to prevent product from drying out. Drying Time: First coat: 1 – 2 hours Second coat: 12 – 16 hours Flood Test: The final coat must be fully cured (approximately 12 – 24 hours, depending on site conditions). VOC: < 1 g/L, calculated SCAQMD Methods Packaging: 3.5 gal. (13 L) pail; 1 gal. (3.78 L) pail, 1 gal. units sold in cartons of four (4). Storage: Store in a cool, dry area. Do not expose container to sun. Keep from freezing. Shelf Life: 12 months Warranty: ARDEX L.P. Standard Limited Warranty applies. For complete product technical information, click on the Downloads tab and open the Technical Data download. |
Product overview |
ARDEX-S-1-K-Product-Overview |
Technical Data |
ARDEX-S-1-K-Technical-Data |
Safety Data Sheet |
ARDEX-S-1-K-SDS |
Specification |
ARDEX-S-1-K_CSI-FORMATTED-SECTION-09-30-00_0818 |
ARDEX S 1-K™
Key Features
-
-
- Flexible, topside waterproofing for interior floors and walls
- Very easy-to-apply, 2-coat system; paint roller or brush
- Easy to install with a paint roller or brush
- Use for bathrooms, showers and other wet areas prior to the installation of tile
- Highly workable consistency; minimal drips and splatters
- Crack isolation up to 1/8″ (3 mm)
- Bonds to a wide range of substrates
-
Standards
SystemOne™ Meets or exceeds ANSI A118.10 Meets or exceeds ANSI A118.12 IAPMO
TECHNICAL DATA ARDEX S 1-K™
Installation Mixing Ratio: Single-component mix. Do not dilute or mix with additives. Approx. Coverage: 195.5 sq. ft. (18 sq. m) per 3.5 gal. (13 L) unit, 2 coats over drywall 56.75 sq. ft. (5.27 sq. m) per 1 gal. (3.78 L) unit, 2 coats over drywall * Coverage will vary with substrate surface profile, porosity and texture. Performance Working Time: Unlimited. Seal unused portion to prevent product from drying out. Drying Time: First coat: 1 – 2 hours Second coat: 12 – 16 hours Flood Test: The final coat must be fully cured (approximately 12 – 24 hours, depending on site conditions). VOC: < 1 g/L, calculated SCAQMD Methods Packaging: 3.5 gal. (13 L) pail; 1 gal. (3.78 L) pail, 1 gal. units sold in cartons of four (4). Storage: Store in a cool, dry area. Do not expose container to sun. Keep from freezing. Shelf Life: 12 months Warranty: ARDEX L.P. Standard Limited Warranty applies. For complete product technical information, click on the Downloads tab and open the Technical Data download.
Product overview
Technical Data
Safety Data Sheet
Specification
Additional Info
ARDEX S 1-K™
One-Component Waterproofing and Crack Isolation Membrane
- Flexible, topside waterproofing for interior floors and walls
- Crack isolation up to 1/8" (3 mm)
- Highly workable consistency; minimal drips and splatters
ARDEX S 1-K™ One-Component Waterproofing and Crack Isolation Membrane is an easy-to-use, single-component, load-bearing waterproofing compound that produces a flexible, positive-side waterproof coating for all common interior building substrates requiring protection from topside water exposure that could damage tile installations. It also provides an excellent bonding layer for ARDEX tile and stone setting materials. ARDEX S 1-K can also be used for crack isolation up to 1/8″ (3 mm)*.
